Rustic dining room tables – 1st, draw a line across the lumber and wire cutting electric miter saw at 2x10s. Repeat for four 2x10s. 2sd, make a mark at 57 inches at 2×10. Cut 2×10 to the length. Repeat until you have four. 3th, measure 53 inches and cut of 2x4s. Measure and cut six 2x4s, 31 inches in length. Ignite propane torch and run it across the high grain slowly.
4th to make rustic dining room tables, measure and mark every 6 inches of 2x4s. Drill a hole widows least 1 inch deep. 5th, Apply glue to the long edges of 2x10s and squeezing them with bar clamps overnight. 6th, apply glue to the ends of two of the 31-inch pieces of lumber, place between 2:53 inch pieces and attach them. 7th, apply adhesive on two sides of 4x4x36-inch legs. Attach them through 2x4s with deck screws.
12 Photos Gallery of: Make A Rustic Dining Room Tables
8th, place 2x10s side-by-side and place the framing square on the ends. Apply glue to the inside of the line where the leg assembly will meet tabletop. 9th, place one of the 31-inch 2x4s between the 53-inch pieces and butt it to the legs. Apply glue to the legs where it will meet the 2×4 and the long side of the 2×4 and securely to the legs and 2x10s. Repeat at the other. Last, imensions 12¼ inches from inside the 2x4s that are secured to the legs and make marks on both 53-inch 2x4s. Apply glue to the long side of 31-inch piece and attach it to 2x10s and the 2×4 frame. Do the same for the last 2×4. Your rustic dining room tables was done.