A garage door squeaks when certain parts need lubrication or the garage door hardware loosens. The noise produced by the door each time it is opened or closed does not dampen its structural integrity but can be annoying. While it may be necessary to replace the door at some point. Perform a basic maintenance check that includes tightening the screws and lubricating the parts before taking these drastic measures. In most cases, the door opens and closes quietly after check-in. Tipping bars can be included in the spring hardware package. But they can also be purchase separately at a home improvement store. Inspect the door hardware for loose nuts and tighten them securely with a wrench. Be careful not to over tighten the screws. As you could strip the holes or pull the screws through the front of the door.
Check that the rollers do not wobble when the door is in operation. Unsealed metal bearings in most rolls are usually carry out after a few years of operating in a dirty environment, causing them to wobble. Open the hinge lock and slide the worn roller off the track before replacing it with a sealed nylon roller that lasts for many years, is silent and does not require frequent lubrication. Inspect the hinges on the garage door hardware kit and tighten the ones that are loose. Avoid over-tightening the hinge since a bit of play is require for smooth operation. Replace the hinge if you see gray dust around the hinge axis. Check the number on the back of the hinge and make sure the number that appears on the replacement hinge matches it. Spray rollers, hinges and springs with garage door lubricant after replacing wear parts.
24 Photos Gallery of: Repairing Squeaks Garage Door Hardware Parts
This lubricant dries on the particular part soon after application to form a non-greasy coating that does not attract dust. View protective lenses and gloves during the repair procedure. Ideally, you should lubricate all moving parts of the garage door every four to six months to help reduce wear and tear and keep it a secret. Keep a clean area around the garage door. So the moving parts do not attract dust, dirt or dust that cause noise. You may have to open the door and custom garage door hardware several times to allow the lubricant to coat the moving parts completely. Avoid cheaper lubrication alternatives such as grease or oil that attract dust and dirt in moving parts. Thereby obstructing to the extent that they cause the door to squeak when opened or closed. Be careful when using the turn bar to adjust the tension of the springs.